Foam Cannon Pro Connector M22x1.5mm Male Thread with 14mm Internal Diameter
R 155.00
- M22x1.5mm male thread, 14mm internal diameter
- Solid brass construction resists corrosion
- Precision-cut thread eliminates leaks and vibration
- Drop-in replacement or upgrade for foam cannon setups
- Precision M22x1.5mm thread locks on leak-free
- Solid brass core handles high-pressure use repeatedly
- 14mm ID keeps water flow and foam output consistent
- Free shippingOn orders over R1000
- Fast delivery2-4 business days
- Safe paymentEncrypted checkout
Guaranteed safe checkout
- Visa
- Mastercard
- Apple Pay
- Google Pay
- Capitec
- Stitch
Frequently bought together
Total price R 1,355.00
Precision Brass Fitting
A connection that holds under pressure
The MJJC Foam Cannon Pro Connector pairs a precision M22x1.5mm male thread with a 14mm internal bore so your foam cannon sits tight, flows freely, and does not drip or rattle loose mid-wash. Solid brass construction means it handles the heat, pressure, and frequency of regular professional use without degrading.
Why This Connector
Built for reliability, not just compatibility
Four reasons professional detailers choose solid brass over cheap alternatives.
-
Leak-Free Thread
Precision-cut M22x1.5mm thread eliminates seeping and vibration loosening under high-pressure use.
-
Corrosion-Resistant Brass
Solid brass core withstands prolonged water exposure and chemical contact without degrading or seizing.
-
Correct Internal Flow
The 14mm internal diameter maintains the water flow rate your foam cannon needs for consistent foam output.
-
Direct Replacement
Fits MJJC Foam Cannon Pro and many other foam cannons requiring a 14mm M22x1.5mm male fitting.
MJJC vs Generic
Brass precision against cheap substitutes
Not all M22 connectors are equal. Here is how this MJJC fitting compares to a typical low-cost generic connector.
| Feature | DetailerSA | Alternative |
|---|---|---|
| Solid brass construction | Yes | No |
| Precision-cut M22x1.5mm thread | Yes | No |
| 14mm internal diameter for correct flow | Yes | Yes |
| Leak-free seal under sustained high pressure | Yes | No |
| Fits standard M22 foam cannon fittings | Yes | Yes |
| Corrosion resistance over extended use | Yes | No |
Built for Detailers
The right fit for mobile and fixed setups
Whether you are running a mobile detail rig or a fixed bay setup, a failing connector disrupts your foam coverage and your workflow. This fitting threads on once, seats properly, and keeps your foam cannon performing consistently across back-to-back washes.
Reviews
What our customers say
No reviews yet. Be the first to review this product.
Questions
Frequently asked
What thread specification does this connector use?
It uses an M22x1.5mm male thread. This is a common standard on many foam cannons and pressure washer lances, but always confirm your equipment uses M22x1.5mm before ordering.
Why does the internal diameter matter?
The internal diameter directly affects water flow rate through the connector. This fitting has a 14mm internal diameter, which suits pressure washers that require the smaller M22 internal bore. Using the wrong ID can restrict flow and reduce foam output quality.
Is this connector compatible with all M22 pressure washer guns?
Not automatically. M22 fittings come in two common internal diameters - 14mm and 15mm. This connector is specifically the 14mm version. Check your pressure washer gun or lance spec before fitting to ensure compatibility.
What is the connector made from?
The connector is manufactured from solid brass with a robust outer housing. Brass is the preferred material for high-pressure water fittings because it resists corrosion and holds thread integrity over extended use.
How do I install this connector?
Thread it on by hand first to ensure the thread seats correctly without cross-threading. Once hand-tight, use a spanner to snug it up - do not over-torque brass fittings. No PTFE tape is typically needed for machined brass threads, but a single wrap can help if you notice any minor seeping.
Can I use this connector at high pressure without it leaking?
Yes. The precision-cut M22x1.5mm thread is designed to provide a stable, leak-free seal under the pressures typical of domestic and professional pressure washers. Solid brass construction adds resistance to deformation under sustained high-pressure use.
Is this suitable for use with MJJC foam cannons specifically?
Yes, MJJC designed this connector to work with their Foam Cannon Pro range. It is also compatible with many other foam cannons and pressure washer setups that use the M22x1.5mm fitting with a 14mm internal diameter.
Can I use this as a permanent replacement rather than a temporary fix?
Absolutely. The solid brass construction and precision thread make this a long-term replacement part, not a stopgap. Many detailers keep a spare on hand for mobile kits, but once fitted correctly it should give reliable service wash after wash.