Zvizzer Flexi M14 Rotary Backing Plate
R 500.00
- Foam-rubber composite for maximum flex
- Conforms to flat and curved body panels
- Velcro attachment for quick pad swaps
- Available in 75 mm, 125 mm and 150 mm
- Flexes to follow flat and curved panels evenly
- Velcro face for instant pad changes on the fly
- M14 thread, three sizes: 75mm, 125mm, 150mm
- Free shippingOn orders over R1000
- Fast delivery2-4 business days
- Safe paymentEncrypted checkout
Guaranteed safe checkout
- Visa
- Mastercard
- Apple Pay
- Google Pay
- Capitec
- Stitch
Frequently bought together
Total price R 5,600.00
Built to Flex
Consistent contact on every contour
Most backing plates are rigid enough to skip off curved bodywork, leaving pad pressure uneven and correction results patchy. The Zvizzer Flexi's foam-rubber composite bends with the panel, so your pad stays flat against the surface whether you are on a sweeping roof or a tight C-pillar.
Why the Flexi
The plate that keeps up with the panel
Four reasons professional detailers reach for the Zvizzer Flexi.
-
Dynamic Flex
Foam-rubber composite bends to curved and compound body shapes, keeping pad contact even throughout the pass.
-
Even Pressure
Reduces pressure hot-spots under the pad so your cut or finish is consistent from edge to edge.
-
Quick Pad Swaps
Full-face velcro face lets you pull a pad off and press a new one on in seconds, with no tools needed.
-
Three Size Options
Available in 75 mm, 125 mm and 150 mm to match your pad set and the panel size you are tackling.
Flexi vs Rigid
What a flexible plate actually changes
Standard rigid backing plates do the basics well on flat surfaces. Here is how the Zvizzer Flexi stacks up against a typical rigid plate when you move into more demanding detailing work.
| Feature | DetailerSA | Alternative |
|---|---|---|
| Follows curved body panels | Yes | No |
| M14 rotary machine fitment | Yes | Yes |
| Velcro pad attachment | Yes | Yes |
| Even pressure on compound curves | Yes | No |
| Reduces pad hot-spots on contoured panels | Yes | No |
| Multiple size variants | Yes | Yes |
Fast Pad Changes
Velcro system built for workflow
The full-face velcro attachment means you can swap between a cutting pad and a finishing pad in seconds without tools. Less downtime between stages, more time on the paint.
Reviews
What our customers say
No reviews yet. Be the first to review this product.
Questions
Frequently asked
What machine thread does this backing plate use?
The Zvizzer Flexi Backing Plate uses an M14 thread, which is the standard fitment for most professional rotary polishers.
What sizes are available?
The plate comes in three sizes: 75 mm, 125 mm and 150 mm. Choose the size that matches the polishing pads you run and the panel areas you are targeting.
What type of pads is this backing plate compatible with?
It accepts any velcro-backed polishing pad. Because it is designed as part of the Zvizzer system, Zvizzer velcro pads will mate perfectly, though it is compatible with any standard hook-and-loop pad of the matching diameter.
Why use a flexible backing plate instead of a rigid one?
A rigid plate maintains a fixed flat surface, which can lift off curved panels and create uneven pressure. The Zvizzer Flexi's foam-rubber composite bends with the contour of the body, keeping the pad in contact across the entire surface for a more consistent cut and finish.
Is this plate suitable for dual-action (DA) polishers as well?
This plate is specified for rotary polishing machines with an M14 thread. Most DA polishers use a 5/16-inch or M8 thread, so confirm your machine's spindle spec before ordering.
How do I attach and remove pads?
The working face of the plate is velcro. Press your hook-and-loop pad firmly onto the plate and it locks in place. To remove, simply peel the pad off. No tools are needed, making pad changes quick between correction and finishing stages.
How do I care for and clean the backing plate?
After each use, remove the pad and wipe any compound or polish residue from the velcro face with a stiff pad-cleaning brush or a blast of compressed air. Keep the velcro clear of debris to maintain a secure grip on your pads. Avoid soaking the plate in water or leaving it in direct sunlight for extended periods.
Can I use this plate on all paint types, including PPF and vinyl?
The backing plate itself does not contact the surface - your polishing pad does. The plate's job is to transmit machine movement and flex to the pad evenly. That said, the improved pressure distribution it offers makes it a good choice when working over PPF or vinyl where consistent, controlled contact is important.