Finish Polish
Sale price
R 725.00
Regular price R 1,450.00
- Silicone-free, hologram-free finishing polish
- Removes P2500 sanding marks and wash swirls
- High-gloss result on scratch-resistant clear coats
- Grinding grade 6.0 / Gloss grade 8.0
- Gloss grade 8.0 - mirror finish without holograms
- Silicone-free formula, safe before coatings or paint
- Cuts P2500 sanding marks and tunnel-wash swirls clean
- Free shippingOn orders over R1000
- Fast delivery2-4 business days
- Safe paymentEncrypted checkout
Guaranteed safe checkout
- Visa
- Mastercard
- Apple Pay
- Google Pay
- Capitec
- Stitch
Frequently bought together
Total price R 2,945.00
Professional Finishing
Tunnel-wash swirls and P2500 marks - gone in one stage
ServFaces Finish Polish pairs high-performance abrasive particles with a silicone-free base to cut surface scratches and sanding marks cleanly, leaving a hologram-free gloss without contaminating the panel for follow-on coatings.
Why Finish Polish
Built for the final stage of correction
Precision abrasives, no silicone, mirror gloss.
-
Silicone-Free Formula
Safe for body-shop environments and compatible with ceramic coatings and PPF directly after polishing.
-
Gloss Grade 8.0
High-performance particles cut at grade 6.0 and refine to a deep, hologram-free mirror finish at grade 8.0.
-
Sanding Mark Removal
Reliably removes grinding marks and striae left by P2500 sandpaper in a single polishing stage.
-
Clear Coat Compatible
Matched to scratch-resistant transparent clear coats on passenger cars, motorcycles and commercial vehicles.
How does it stack up?
ServFaces Finish Polish vs a typical cheaper finishing polish
Choosing a finishing polish comes down to whether it can genuinely remove what you need removed while leaving a clean, coating-ready surface. Here is an honest look at where ServFaces Finish Polish stands apart and where any decent product in this category holds its own.
| Feature | DetailerSA | Alternative |
|---|---|---|
| Silicone-free formula safe for body shops and follow-on coatings | Yes | No |
| Removes P2500 wet-sand marks and striae in a single stage | Yes | No |
| Abrasives matched specifically to scratch-resistant clear coats | Yes | No |
| Delivers a hologram-free, mirror-level gloss finish | Yes | Yes |
| Removes light swirls and tunnel car-wash scratches | Yes | Yes |
| Eliminates all remaining haze without a follow-up ultra-fine step | No | No |
Body-Shop Ready Formula
Silicone-free from the start, coating-ready at the end
With no silicone in the formula, Finish Polish fits naturally into a professional workflow where the next step is a ceramic coating, sealant, or PPF - no extra degreasing stage to strip silicone contamination before you lay down your protection.
Reviews
What our customers say
No reviews yet. Be the first to review this product.
Questions
Frequently asked
What machine and pad combination works best with Finish Polish?
ServFaces recommends a Polishing Pad V2 or V3, or a Polishing Pelt, paired with a rotary polisher. Start at roughly 800 rpm with moderate-to-firm pressure to get the abrasives working, then back off the pressure and bring the speed up to around 1,500 rpm to refine and build gloss. Maximum operating speed is 2,000 rpm.
Can Finish Polish be used with a dual-action (DA) polisher?
The product is described and tested with a rotary polisher. If you use a DA, keep in mind the rpm and pressure guidance still applies in principle - start with firmer pressure and a slower setting, then ease off to refine. Results may vary compared to a rotary, and heavier sanding marks may need more passes.
Is this product safe to use before applying a ceramic coating or paint protection film?
Yes. Finish Polish is completely silicone-free, which means it will not contaminate the surface or interfere with the adhesion of ceramic coatings, sealants, or PPF. Still carry out a full decon and IPA wipedown after polishing before any coating application.
What paint defects will Finish Polish actually remove?
It is rated to remove surface scratches from conveyor tunnel-wash systems, grinding marks and striae left by P2500 sandpaper, and similar light surface wear. With a grinding grade of 6.0 it is a finishing-stage polish, not a cutting compound - deep scratches or heavy oxidation will need a more aggressive product first.
What surfaces is Finish Polish compatible with?
It is formulated for painted surfaces on passenger cars, motorcycles and commercial vehicles - including scratch-resistant transparent clear coats. Do not use on bare metal, plastic trim, glass or rubber without testing compatibility first.
After polishing, there is a slight haze or veil on the paint. What should I do?
ServFaces specifically addresses this: follow up with Ultra Fine Polish to remove any residual veiling or marks left after the Finish Polish stage. This is a normal part of a two-stage finishing process when working on very scratch-resistant clear coats.
Can I apply Finish Polish in direct sunlight or on a warm panel?
No. Do not apply on hot surfaces and avoid direct sunlight. The product must not be allowed to dry on the surface before you buff it off. Work in a shaded environment with panel temperatures in a comfortable working range, ideally between 15°C and 25°C.
How do I remove the last residue after polishing?
While the product is still workable, wipe residue off with a clean ServFaces microfibre cloth. The remaining polish lifts easily at this stage. Do not let it flash dry - dried residue is significantly harder to remove and may require a fresh application to re-wet and lift.