Flex Cordless Orbital Polisher Set PXE 80 10.8-EC/2.5 P
R 13,199.00
- Tool-free switch between rotary and 12mm orbital
- Brushless motor with EMS for longer machine life
- Hologram-free finishing from spot sanding to final polish
- Compatible with all Flex 10.8V battery packs
- Tool-free rotary and orbital mode in one machine
- 12mm stroke for hologram-free finishing
- Brushless EMS motor built for extended service life
- Free shippingOn orders over R1000
- Fast delivery2-4 business days
- Safe paymentEncrypted checkout
Guaranteed safe checkout
- Visa
- Mastercard
- Apple Pay
- Google Pay
- Capitec
- Stitch
Frequently bought together
Total price R 17,349.00
One Tool, Two Modes
Switch from Cutting to Finishing in Seconds
The Flex PXE 80's tool-free quick-change system lets you move between rotary and random orbital drive without stopping to swap machines. That means faster spot corrections, cleaner transitions between stages, and less kit to carry to every job.
Why the PXE 80
Built for Detailers Who Work Smart
Two drive modes, one cordless machine, zero holograms.
-
Instant Mode Switch
Tool-free quick-change moves you from rotary cutting to 12mm orbital finishing without interrupting the job.
-
Hologram-Free Finish
12mm random orbital free-running action leaves dark and sensitive paint clean and swirl-free on the final pass.
-
EMS Motor Protection
The Electronic Management System guards against overload and maintains consistent speed under load.
-
Fatigue-Free Design
Vibration-optimised body with softgrip surfaces lets you work longer without hand and wrist fatigue.
How does it stack up?
Flex PXE 80 vs a typical budget cordless polisher
Choosing a cordless polisher means weighing up more than just price. Here is an honest look at where the Flex PXE 80 pulls ahead and where a budget alternative keeps pace.
| Feature | DetailerSA | Alternative |
|---|---|---|
| Switches between rotary and random orbital drive modes in one machine | Yes | No |
| Tool-free drive mode swap with no extra heads or adapters required | Yes | No |
| Brushless motor for longer service life and consistent power | Yes | Yes |
| LED battery capacity display for clear runtime indication | Yes | Yes |
| Compact size suited to tight panels and awkward body shop areas | Yes | Yes |
| Lower purchase price | No | Yes |
Engineered for the Trade
Hologram-Free Results, Cordless Freedom
At 12mm stroke in random orbital mode the PXE 80 delivers a true free-running action - no holograms, no swirl marks, no buffer trails on dark paint. The brushless motor and EMS keep the machine running efficiently job after job, while the 10.8V Flex battery platform means the same pack powers your other Flex tools on the go.
Reviews
What our customers say
No reviews yet. Be the first to review this product.
Questions
Frequently asked
What drive modes does the PXE 80 support?
The PXE 80 supports two modes: rotary and random orbital free-running. You switch between them using the tool-free quick-change system on the machine, so no spanners or adapters are needed mid-job.
What orbital stroke does it run?
It runs a 3mm stroke in one configuration and a 12mm stroke in the other. The 3mm stroke is suited to controlled spot work, while the 12mm stroke gives you genuine random orbital action for finishing without holograms or swirl marks.
What battery does it use, and is the battery included in this set?
The PXE 80 is part of the Flex 10.8V battery platform and is compatible with all Flex 10.8V battery packs. Check the set contents listed on this page to confirm exactly which batteries and charger are included with this specific set.
What size backing pads does it take, and are pads included?
Cushioned special velcro backing pads for polishing and sanding are included in the set. The source description confirms these are included but does not state the pad diameter explicitly, so check the box contents or contact us to confirm pad size before ordering additional pads separately.
Can I use it for full-panel correction or is it only for spot repair?
The PXE 80 is described by Flex as the ideal complement for spot repair, SMART repair and finishing environments. Its compact size and cordless design make it exceptional for panel blending and spot work. It can be used on full panels, but detailers doing full-car heavy correction on large surfaces typically pair it with a larger machine for efficiency.
Will it leave holograms on dark or black paint?
No, provided you are using the random orbital mode with an appropriate finishing pad and polish. The 12mm random orbital stroke produces a true free-running action that does not leave the rotary holograms or buffer trails that sensitive dark paint reveals. In rotary mode, technique and pad selection matter, as with any rotary.
What does the Electronic Management System (EMS) do?
EMS is Flex's onboard protection and monitoring system. It protects the machine from overload and overheating, helps maintain consistent speed under load, and extends the overall service life of both the motor and the battery pack. You will also see the battery level at a glance via the LED capacity display.
Is this machine suitable for use on PPF or ceramic coatings?
Yes. In random orbital mode at lower speed stages the PXE 80 is well suited to topping PPF with finishing polishes or levelling ceramic coatings during installation. The vibration-optimised design and softgrip surfaces help you maintain light, controlled pressure - important when working on PPF where consistent speed and pressure matter. Always verify your coating manufacturer's application guidelines before using any machine applicator.