Ceramic Coat RIms 50ml - ServFaces

R 1,200.00
Tax included. Shipping calculated at checkout.

Surface coating for various types of rims


The transparent and high-strength surface coating of the servFaces line is a diverse and unique quality product for rim coating on all vehicles. It offers optimum protection on painted and unpainted surfaces of rims with enormous gloss enhancement.

The highly-transparent coating forms a long-lasting protective film resistant to dirt and easy to clean with minimum consumption. Ceramic Coat Rims is also resistant to temperatures up to +1,050°C. The product cannot be removed using conventional cleaning agents. Ceramic Coat Rims protects even from damage caused by leaking brake fluid thanks to the special integrated resin. 

Ceramic Coat Rims is very flexible up to a film thickness of 8 µm and therefore cannot chip or peel off.


Areas of application:

  • Painted and powder-coated rims
  • Gloss & matte coatings
  • High-gloss polished rims
  • Chrome rims



  • Long-term protection
  • Very high hydrophobic properties
  • Resistant to washing bays & stable gloss
  • Resistant to cleaning agents & environmental influences (pH 2 - 13)
  • UV resistant & environmentally-stable
  • Easy-to-clean surfaces
  • Unique gloss & colour depth
  • Resistant to temperatures of -50°C - +1,050°C
  • Simple to apply



  • Clean the surface with Surface Cleaner Ultima followed by Surface Cleaner Neutra to neutralize.
  • Put the application cloth onto the applicator.
  • Apply 12 - 18 drops of Ceramic Coat Rims onto the application cloth and spread it quickly on the surface (a visible film should form). Treat the surface in small sections (max. 50 x 50 cm).
  • Let the product dry for approx. 1 - 3 minutes! (The time depends on the applied quantity, air humidity and ambient temperature). The longer the product reacts on the surface, the thicker the coating and the greater the protective and hydrophobic effects.
  • Remove surplus material with a Special Coating Towel (peripheral areas first, then work from the outside in with straight quick motions).
  • Take another, fresh Special Coating Towel and polish the surface with slight pressure (peripheral areas first, then work from the outside in with circular motions).
  • Should streaks still be visible, take another fresh Special Coating Towel and repeat the procedure until the streaks are invisible (check with a light).
  • Recoating with Ceramic Coat Rims: possible after 20 minutes. Wait no longer than 35 minutes!
  • The product can be applied by in a fine spray pattern, too. You will need clean, dry and oil-free compressed air for that! Contaminants in the compressed air can cause s pre-reaction of the product after which the treated surfaces become dull and rough.

Caution: Do not apply the product in direct sunlight!



One layer of Ceramic Coat Rims has a lifetime of approx. 30 - 36 months (manual washing). Each additional layer enhances the lifetime by a further 8 - 9 months. To achieve a longer protection time, you can apply the product in a fine spray pattern and leave to dry. In this way, you will obtain a dry film thickness of approx. 3 - 5 µm.

Caution: Regular cleaning in a car wash reduces the lifetime of the coating since the effects of heavy-abrasive brushes slowly remove and scratch the product!


Application temperature: +15°C to +35°C

Consumption: 3 - 5 ml per m²

Weatherproof after: 18 - 24 h

Fully cured after: 9 - 10 days

pH resistance: pH 2 - 13

Storage temperature: +10°C to +25°C

Storage and shelf life: At least 12 months at ambient temperature in tightly sealed original container stored upright. Caution: Protect the product from direct sunlight and freezing temperatures!



Emulsions and coating products need a certain period of time to bind to the surface and fully cure after application. Therefore, please check the curing time of individual products. Only this can guarantee that the product provides the desired benefits. Direct exposure of the surface to water or cleaning agents after application can significantly reduce the performance of the product properties.


General information about the product:

Factors such as preliminary cleaning, application temperature, curing time, etc., can influence the product's effectiveness and lifetime. Therefore, fluctuations of product properties cannot be excluded.

Product information

We use Payfast's secure payment portal for all our online payments.

Free Shipping on purchases over R1000.

Professional Detailing Products

Detailer South Africa

Detailer South Africa - Car Detailing at its best

Detailer South Africa is a leading supplier of professional car detailing products manufactured both locally and internationally. We offer a wide range of car care products, including:

  • Detailing Products: Detailer South Africa offers a comprehensive selection of detailing products to meet all your car care needs. From car shampoos and conditioners to polishes and waxes, we have everything you need to keep your car looking its best.
  • Car Polish: Looking to restore your car's shine? Detailer South Africa has a variety of car polishes to choose from, formulated to remove minor scratches and imperfections and leave your car with a brilliant finish.
  • Car Wax: Protect your car's paint and keep it looking showroom-fresh with a coat of high-quality car wax from Detailer South Africa. We offer a variety of waxes to suit different needs and preferences.
  • Car Wash Shampoos: Keep your car clean and streak-free with a car wash shampoo from Detailer South Africa. Our shampoos are formulated to gently remove dirt and grime without harming your car's paintwork.
  • Car Wash Accessories: In addition to car wash shampoos, Detailer South Africa also offers a variety of car wash accessories, such as wash mitts, buckets, and drying towels.

Detailer South Africa is committed to providing its customers with the highest quality car care products and exceptional customer service. Our knowledgeable staff is always happy to help you choose the right products for your car's needs.