1 4

Innovacar

Innovacar SINH Top Coat

R 1,450.00 R 920.00 Sale
Tax included. Shipping calculated at checkout.

SINH TOP COAT BY INNOVACAR NANO CERAMIC TREATMENT FOR CARS

innovacar's SiNH Top Coat is the best water repellent in the entire Innovacar ceramic product line and the latest addition to the exclusive Si-N-H's professional car nanoceramic treatment that creates a highly durable, hydrophobic and elastic ceramic coating.

It is the latest evolution of SiO2 coatings, giving you an innovative formula that combines ease of application with high performance.

Ceramic coating on the car body aims to protect and enhance the gloss and depth of colour for a durability* far superior to any wax or sealant.

Thanks to the protective barrier created, dirt and water slide off the bodywork, limiting aggressive chemical/physical interventions and thus preserving the surface over time.

Main features*:

  • Beading and sheeting effect: our Si-N-H system is the ceramic with the best water repellency effect in the Innovacar range. This allows for quick drying and less residue on the car surface.
  • Easy to use: it is a professional ceramic treatment, but is easier to use and apply than other products in its category;
  • No need for IR lamps: thanks to its characteristics it has a fast drying time of about 20 minutes at room temperature (23°C) and 50% humidity, which means it can also be used without specific lamps;
  • Anti-static and dirt-repellent effect:along with the lotus flower effect, these properties reduce the need for maintenance, making the cleaning phase easier;
  • Certified long service life: tests at certified external laboratories have monitored changes in gloss (ISO 20566:2013) and surface hydrophobicity in both automatic and manual wash cycles, confirming a service life of up to about 4-5 years (75,000 km or up to 60 washes-car washes). In addition, the durability is extended up to 9-11 years by first applying SiNH Base Coat.
  • Colour depth: it has a gloss and colour depth effect that enhances the paint of the bodywork;
  • Resistance and protection: The treated surface is resistant to UV radiation, corrosion and high temperatures.
  • Suitable for different types of surfaces: it can be used on bodywork, aluminium, steel and plastic parts;
  • Suitable for matt varnishes, PPF and wrapping: it can also be used on matt varnishes and PPF protective films or wrapped machines and vehicles;
  • Suitable for all types of vehicles: it can be used on cars, motorbikes, bicycles and boats.
  • Safety: it is PFAS free and complies with the content requirements for volatile organic compounds (VOC) in accordance with Directive 2004/42/EC and with the analysis method in compliance with UNI EN ISO 11890-1:2008;

Average consumption: 30 ml per vehicle.

The application and user-friendly properties of SiNH products ensure less product application on the car, namely 30 ml of product corresponds to 50 ml of the traditional ceramic coatings available on the market

Summarised technical data:

  • Technology: Si-N-H
  • Hardness: Soft - 5H
  • Flexibility- elasticity: 5/5
  • Beading - contact angle: 5/5 (increase contact angle by approximately ≃ +25%)
  • Depth of gloss: 5/5
  • Self-cleaning capacity: 5/5
  • Ease of use: 5/5
  • Self-repair with heat: 5/5
  • Limescale resistance: 4/5
  • Abrasion resistance: 3/5
  • UV ray protection: 5/5
  • Temperature resistance: 400 °C
  • Product consumed: 3ml/m2
  • Layer thickness: 1000-3000 nm
  • Duration years**: up to 4-5 years
  • Manual wash time*: more than 60
  • Automatic wash time*: more than 60

*The washing cycles indicated are the result of tests conducted by two independent external laboratories. The first test was performed to check whether the contact angle had changed compared to the initial condition, with washing cycles using SP1 Prewash; the second test was conducted to check whether the coating persisted after automatic washing cycles, with the use of a chemical product and quartz powder in compliance with ISO 20566:2013;

* The specified durability in terms of time and kilometres for the entire Innovacar coating product line is based on the results of stress tests performed on site with the support of our national and international partners in various parts of the world.
 The tests were performed under extremely different climatic/environmental conditions:

  • Mumbai (India): because of the fact that it is a metropolis with a high level of smog and has a tropical climate
  • Moscow (Russia): because of its very cold temperatures
  • Abu Dhabi (United Arab Emirates): because of its torrid climate and frequent sandstorms.
  • Major European capitals: where weather and road conditions are certainly more “standard”;

Throughout the tests, washing took place on average once a month. However, it was not always possible to follow the steps of the Innovacar coating maintenance programme recommended by us, which allowed us to simulate the worst case scenario.
The results achieved and the feedback received from our partners show that the weighted average one-year life of our coatings is equal to approximately 15,000 km.
**with the Innovacar maintenance programme

DIRECTIONS FOR USE it is recommended to:

  • Preferably apply the product in a temperature controlled environment (from +5 °C to 25 °C), which is free from contamination, with controlled humidity and properly lit;
  • Frequently replace Micron Suede.
  • Use the Micron 2F this way: the low pile part to remove 80-90% of the product and the long pile part to finish it off.
  • Change the Micron 2F often – every 2 panels on average.
  • Do not treat the surface with dirty or worn cloths.
  • For maximum efficiency, use Innovacar maintenance products only.
Step 1 – Preparing the car (this step must be carried out if not previously done): 
  1. Prewash with SP1 Prewash or similar products.
  2. Wash with S2 Foamy to clean the surface.
  3. Chemically decontaminate the surface from tar using D3 Tar; from ferrous residues using D1 Iron and from limescale using DS Scale.
  4. Then mechanically decontaminate the surface with Clay Bar (or Clay Mitt), using DL Lube.
  5. If necessary, polish the car to remove any defects and achieve a perfectly smooth surface.
  6. Remove any traces of residual oil and compound with D2 Check.
  7. Visually check the car to make sure it is perfectly decontaminated, clean and, therefore, ready for applying the ceramic coating.
Step 2 – Applying the ceramic coating: 
  1. Shake SiNH Top Coat.
  2. Apply a few drops of SiNH Top Coat to the Micron Suede, wrapped around the Foam App Block.
  3. Apply the product using the Criss-Cross method (at least 3 times), treating one panel at a time (approximately 50×50 cm).
  4. Allow to polymerise for at least 30 seconds (at high ambient temperatures) and up to a maximum of 2 minutes (at low ambient temperatures), before removing any excess product, if necessary by smoothing with a Micron Buffing Wipe.
  5. If excess product is not properly removed from the surface within 10 minutes, the product can be reapplied, making sure to even it out.
Step 3 – Crosslinking the protective barrier: 
    1. After 4 hours, apply the final coat of SC0 Hydro Sealant. This is the final protective layer that is intended to preserve the surface during the complete curing period;
    2. Wait 3-4 hours before leaving the vehicle outside and 7 days before leaving it out in the snow/rain or washing it again, as recommended in the Innovacar maintenance programme.

PRECAUTIONS Use within 6 months of opening, making sure to carefully close the bottle after use and to store the product in a dry place, away from light and heat, at a 5 to 25°C temperature. Always refer to the MSDS and the precautions and instructions provided on the label. To achieve the utmost performance and durability, make sure you always follow the steps of the Innovacar Cyclical System; COVERAGE  30ml/car.

Product information

We use Payfast's secure payment portal for all our online payments.

Free Shipping on purchases over R1000.

Professional Detailing Products

Detailer South Africa

Detailer South Africa - Car Detailing at its best

Detailer South Africa is a leading supplier of professional car detailing products manufactured both locally and internationally. We offer a wide range of car care products, including:

  • Detailing Products: Detailer South Africa offers a comprehensive selection of detailing products to meet all your car care needs. From car shampoos and conditioners to polishes and waxes, we have everything you need to keep your car looking its best.
  • Car Polish: Looking to restore your car's shine? Detailer South Africa has a variety of car polishes to choose from, formulated to remove minor scratches and imperfections and leave your car with a brilliant finish.
  • Car Wax: Protect your car's paint and keep it looking showroom-fresh with a coat of high-quality car wax from Detailer South Africa. We offer a variety of waxes to suit different needs and preferences.
  • Car Wash Shampoos: Keep your car clean and streak-free with a car wash shampoo from Detailer South Africa. Our shampoos are formulated to gently remove dirt and grime without harming your car's paintwork.
  • Car Wash Accessories: In addition to car wash shampoos, Detailer South Africa also offers a variety of car wash accessories, such as wash mitts, buckets, and drying towels.

Detailer South Africa is committed to providing its customers with the highest quality car care products and exceptional customer service. Our knowledgeable staff is always happy to help you choose the right products for your car's needs.