THE BENEFITS OF NEVE
It is a professional product that can be used both in car washes and by car care enthusiasts in general.
Main features:
- Snow effect: when used, it creates a thick and full-bodied foam that durably adheres to the bodywork to reduce the friction of car-wash brushes or the mitt, thus minimising the formation of micro-scratches;
- Deep cleaning: it can remove all types of dirt and road contaminants;
- Carefully formulated- the product contains no added sodium hydroxide, phosphates and NTA*;
- Professional product: it is designed as a foam shampoo and can be used in all types of car wash systems be they freestanding, self-service or drive-in, tunnels etc., but also by private users;
- Suitable for all vehicles: it can be used on all types of vehicles including sports cars, utility vehicles, vans, camper vans, trucks and motorbikes;
- Multi-format: it is available in both a 1 L and 4.54 L format;
Floral fragrance: it leaves a pleasant scent after each application.
*May contain traces.
NEVE IS IDEAL
- To experience the performance of a professional product at home;
- To enjoy the benefits of a thick and full-bodied foam during washing that adheres to the bodywork for longer for improved cleaning;
- For a more exciting car washing experience thanks to the spectacular snow effect that envelops the vehicle during washing.
HOW TO USE NEVE
We recommend using Neve as a foam shampoo for washing.
Main steps:
- Spray the foam over the entire vehicle, starting from the bottom and applying the product horizontally, gradually moving upwards. This will prevent dripping during rinsing.
- Then rinse with plenty of high-pressure water. Move in a horizontal direction from the top part of the vehicle, gradually moving downwards.
- If applied with a foam gun and foam lance: dilute to a ratio between 1:2 and 1:12, i.e., use between 330 ml and 75 ml of product and top up with water (between 670 ml and 925 ml) to obtain a 1 L ready-to-use solution.
-During application, the actual dilution ratio may reach between roughly 1:45 and 1:195.
- If applied with a pre-pressure pump or bucket: use a dilution of 1:25 to 1:50, that is, use 40 ml to 20 ml of product and fill the remainder with water (960 ml to 980 ml) to make a 1 L solution ready for use. The dilution can go up to 1:500 for frequent washing.
- If used as a pre-wash detergent for weekly cleaning: use a foam gun or foam lance with a dilution ratio between pure and 1:19, i.e., use up to 50 ml of product and top up with water (950 ml) to obtain a 1 L ready-to-use solution. During application, the actual dilution ratio may reach between roughly 1:15 and 1:300.
For professional use in car washes:
- Pump: 10-40 pumping 6 l/h pump capacity 5-40 ml consumption per cycle;
- Dosing pump: 0.2-2%;
- Sprayer: 1:50 to 1:500;
- Foam lance: dilute to a ratio between 1:2 and 1:12, i.e., use between 330 ml and 75 ml of product and top up with water (between 670 ml and 925 ml) to obtain a 1 L ready-to-use solution. During application, the actual dilution ratio may reach between roughly 1:45 and 1:195.
CAUTION`;
- Causes skin irritation.
- Causes serious eye irritation.
- If medical advice is needed, have product container or label at hand.
- Keep out of reach of children.
- Read label before use.
- Wash hands thoroughly after handling.
- Wear protective gloves/protective clothing/eye protection/face protection.
IN CASE OF CONTACT WITH THE EYES: rinse carefully with water for several minutes. Remove contact lenses if present and easy to do. Keep on rinsing.
Contains among other ingredients: Equal to or greater than 5% but less than 15%: Anionic surfactants. Less than 5%: EDTA and Salts, Non-ionic surfactants. Fragrances (d-limonene, Benzyl benzoate, Benzyl salicylate, 1,3,4,6,7,8-hexahydro-4,6,67,8,8-hexamethylcyclopenta-gamma-2-benzopyran, Linalool, 3-methyl- 4-(2,6,6-trimethyl-2-cyclohexen-1-yl)-3-buten-2-one, Tetramethyl Acetyloctahydronaphthalene), Preservatives (Phenoxyethanol, Benzisothiazolinone).