This lightweight headlamp features a modern design and a comfortable woven band for extended wear, with a battery indicator for convenient monitoring. Built to withstand tough environments, I-VIEW is water and dust resistant (IP65) and offers an adjustable light output up to 400 lumens. The OPTILight setting ensures optimized light and runtime, providing constant lumen output performance. With a high-efficiency multi-LED design and a 5-year extended warranty, I-VIEW delivers reliability and superior illumination for any work situation.
CHARGING INSTRUCTION AND BATTERY TIPS
- Only charge the lamp indoors at 5 °C to 40 °C / 41 to 104 °F.
- Before using the lamp for the first time, the battery must be fully charged.
- The red charging indicators light up with the highest flashing during charging.
- The highest charging indicator will not be flashing if temperature does not allow charging.
- The red charging indicators will all be constantly on when fully charged.
- Always replace the battery with an original battery.
- Do not leave the battery without charge for an extended period.
- Deep discharge risks damaging the battery.
USE:
- To turn the lamp on or off, press the power button (A).
- Press and hold the power button (A) to toggle sensor function.
- Press the brightness button (B) to turn on the lamp in OPTILight mode.
- The OPTILight indicator will turn on.
- To increase or decrease the brightness, press the brightness button (B).
- When the brightness level is changed, the new value is saved, and the lamp will start at that level the next time it is turned on.
- When battery is below 10 %, the lamp will flash 3 times every 2 minutes.
- If the lamp temperature is too high or low, the lamp will turn off and flash all battery indicators 10 times.
- To turn the light on or off with the sensor wave your hand twice in front of the lamp
- If the sensor is enabled, the lamp will remain in standby for 30 minutes, after which the lamp shuts down.