The car exterior wash kit by Innovacar is designed to give you all the products and some accessories required to wash your car professionally and thoroughly.
Standard kit includes:
- 100% Degreasing 500 ml: Car cleaner degreaser
- SP1 Prewash 1000 ml: Car shampoo and prewash detergent
- S2 Foamy Color Pink 1000 ml: Car shampoo with pink foam
- SC2 Dressing: Hydrophobic protective treatment to restore plastic and leather
- Microfibre Wash Mitt: Microfibre wash mitt
- Micron XXL: Microfibre Cloth for car drying
- FREE - DS Scale: Shampoo & Decontaminating Treatment and Limescale Remover
100% Degreasing
When washing car exteriors in Car Detailing, and in some other cases, it is always recommended to use a universal degreaser which can help with all types of stubborn dirt!
100% Degreasing is the ideal product by Innovacar for a strong degreasing action to remove the dirt on your car.
It is suitable for rims, tyres, insects, rubber mats, external seals, plastics and the engine compartment.
For further details on the products, directions for use and safety information, you may find in-depth information on the specific data sheet: 100% Degreasing Innovacar
SP1 Prewash
Car prewash is an important phase of detailing and it takes place without touching the car.
SP1 Prewash by Innovacar is the ideal prewash product, that can eliminate a large amount of dirt in touchless mode.
If used, it facilitates the following manual car wash phase, reducing the amount of dirt to be eliminated.
Pink S2 Foamy
Car exteriors can be washed in a bath of colours and perfume!
Pink S2 Foamy is the ideal product by Innovacar to have a car detailing shampoo with neutral ph and a super coloured and scented active foam.
SC2 Dressing
SC2 Dressing by Innovacar is the most suitable product to dress, renovate and regenerate interior and exterior car components, like plastics, vinyl, leather, rubber and acrylic materials that are worn over time and by atmospheric effects.
The protective effect lasts up to 4 months if applied alone on the car after being cleaned properly with SP1 Prewash and S2 Foamy. The protection can last up to 8 months, if combined with W1 Quick Detailer used 20 minutes after the first application of SC2 Dressing and maintained over time & with H20 Coat, every 3 washes.
Micron Wash Mitt
Micron Wash Mitt by Innovacar is a super-absorbent and two-sided microfibre wash mitt suitable for car washing.
It is a great solution for washing the top part of the car, finding the correct mix of gentleness and cleaning needs.
Micron XXL
Micron XXL by Innovacar is the 70 x 90 microfibre cloth for car drying, designed specifically to dry large surfaces quickly.
Furthermore, the microfibre that composes the cloth has a high drying capacity, suitable for absorbing a large amount of water in a short time without leaving marks or stains.
DS Scale
DS Scale by Innovacar is a decontaminating shampoo to treat and combat water spots and limescale stains on the body of a vehicle.
HOW TO USE THE PROFESSIONAL CAR WASH KIT
1. Perform a touchless prewash using SP1 Prewash (with suitable dilution) spraying or nebulizing it on the whole vehicle.
2. Then rinse with high pressure water;
3. 100% Degreasing may be used when stubborn dirt is present to clean rims, tyres, the engine and surfaces where the door shuts. Spray the product directly on the surface and leave it to act for a few minutes, then rinse. In the presence of heavy duty dirt, consider using a brush to treat the affected area or a 300-350 GSM microfibre;
4. Wash with S2 Foamy colour, the product can be applied with the two-bucket method or with a foam gun or a manual precompression pump. Use the Wool Wash Mitt in order to be gentle on every surface;
5. If the vehicle is extremely dirty and covered in limescale, use the DS Scale as a shampoo to eliminate the heavy dirt and limescale.
6. Proceed to the drying phase with Micron XXL microfibre cloth;
7. Then proceed apply 2-3 sprays of SC2 Dressing on the low pile microfibre cloth proceeding by applying the product horizontally from right to left all over the area and then start again vertically, from top to bottom, along the same area. Go over surface again with a medium/long fibred microfibre cloth with circular movements, turning it over often to remove any excess. Wait up to 7 hours after the application for complete activation. The effect lasts up to 4 months.
