Car Decontamination Kit - Innovacar

Car Decontamination Kit by Innovacar is a fully equipped kit to clean, polish, decontaminate and remove dirt from your car.

THE ADVANTAGES OF THE CAR CHEMICAL DECONTAMINATION KIT

The car chemical decontamination kit by Innovacar is designed to provide all the products you need to take care of the main sources of contamination such as iron, limestone, acid rain, tar, glue and resins.

It is the ideal solution when you wish to remove deep dirt while minimising mechanical action.

Standard kit: you will find the following products and accessories in the kit box:

- DS Scale 100 ml: Shampoo and Decontaminant for Limestone and Acid Rain;
- D1 Iron 500 ml: Iron Remover and Decontaminant for Iron suitable for Bodywork, Rims    and Windows;
- D3 Tar 500 ml: Decontaminant for Tar, Resin and Glue;
- Micron UP: Microfibre cloth;
- Hard Brush: Hard bristle brush;
- FREE - S2 Foamy 100 ml: Active foam shampoo with neutral ph;

DS Scale:

Limestone is a contaminant that can damage the car’s bodywork by penetrating deep into the paint layers and causing visible defects. Furthermore, it can deposit on protective and nanotechnological layers applied to the bodywork, interfering and decreasing performance.

DS Scale by Innovacar is the ideal product to counter the typical water and limestone stains that deposit on the car’s bodywork, headlights, hard plastics and windows.

It can be used both as a decontaminant and a maintenance shampoo.

For further details on the products, directions for use and safety information, you may find in-depth information on the specific data sheet: DS Scale Innovacar

D1 Iron:

Iron and ferrous particles are microscopic contaminants that are able to penetrate surfaces and that may damage finish and clear coat.

D1 Iron by Innovacar is the ideal product to decontaminate all surfaces of the car like the bodywork, rims, hard plastics and glass from iron.

It can also be used on rust stains or severe contaminations.

For further details on the products, directions for use and safety information, you may find in-depth information on the specific data sheet: D1 Iron Innovacar

D3 Tar:

Tar, asphalt, resins and glues are contaminants that are very difficult to treat and remove from the bodywork without using a specific product.

D3 Tar by Innovacar is ideal to dissolve road dirt residues quickly and effectively.

Furthermore, it does not contain hydrocarbons, making evaporation slower and allowing the product to be more effective, quick and gentle for use on all surfaces treated with nanotechnological protections.

For further details on the products, directions for use and safety information, you may find in-depth information on the specific data sheet: D3 Tar Innovacar

Micron Up:

Micron Up is the short pile microfibre cloth by Innovacar, particularly suitable for removing compound, coating and polish residues from polishing operations.

It is multi-purpose and may also be used with spray products to clean interiors such as leather, dashboards, door panels as well as metal polish.

Furthermore, it is made with the edgeless and laser cut technology, making it ideal to work on cars without fear of accidental scratches thanks to the absence of stitching and labels.

For further details on the products and directions for use, you may find in-depth information on the specific data sheet: Micron UP Innovacar

Hard Brush:

The Car Detailing Hard Brush is ideal as an accessory for removing stubborn dirt present on rims and the engine, for example.

It has an anti-slip, raised handle to facilitate use and a grip to prevent it from slipping from the hands.

Furthermore, the bristles are hard and resistant to solvents and chemical products in general.

For further details on the products and directions for use, you may find in-depth information on the specific data sheet: Hard Brush Innovacar

Free product - S2 Foamy:

S2 Foamy is the product by Innovacar most suitable for a correct car detailing manual wash phase thanks to its active foam and lubrication.

Furthermore, it has a neutral PH ideal for preserving bodywork surfaces treated with coating and preserve and prolong applied protective and nanotechnological films.

It is recommended to use it with the two-bucket method, but it may also be used with specific dilutions with the manual precompression pump and the foam lance.

For further details on the products, directions for use and safety information, you may find in-depth information on the specific data sheet:

HOW TO USE THE CHEMICAL DECONTAMINATION KIT



To perform a chemical decontamination, you must proceed on a car where a prewash to remove the largest part of organic dirt has already been performed.

It is recommended to place the vehicle in a well-lit area, but not under direct sunlight and away from wind.

For dilutions and the specific directions for use of every product and accessory, we recommend reading the individual data sheets.

1. Proceed with decontamination starting from the tyres, which are usually the most contaminated area, using D1 Iron for ferrous contaminations (brake lining).
2. If diluted, use D1 Iron to decontaminate the other parts of the vehicle such as the bodywork and glass.
3. Clean the most contaminated areas with the aid of a brush.
4. Leave the product to act and then rinse.
5. Inspect to see if there are any other contaminations.
6. In case of contaminations caused by tar/resin, use D3 Tar by spraying it on the contaminated area and leaving it to act for a few minutes. Remove the